Hammond 290AEX / Fender # 125P1B clon (read description)

Copy of the discontinued Hammond 290AEX transformer for Fender. Made in Spain.

We have manufactured this transformer under the same electrical specifications as the Hammond 290AEX, but due to the metric-imperial conversion, the core measurements and mounting holes are slightly different. Normally you only need to move the mounting holes a few millimeters to make it fit. You can check the measurements below.

Features:

• Electrically designed to directly replace the original transformer. Laminated and coiled.
• The dimensions of the core and anchor are very similar to the original although with slight differences due to the metric-imperial conversion (see measurements)
• Material and design specifications were kept as close to the original part as possible to preserve the characteristic "tone" of the transformer.

Technical data:

• Primary voltage: 240V-50Hz
• Secondary voltages: 0-5V (2A) / 0-6.3V (2A) / 325V - 0 - 325V (81mA)

Measurements:

• Hole spacing: 62x50.4mm
• Iron core size: 62.5x75x36mm