Print

Hardware


Display per page
Sort by
Product no.: SCW-SR125

GÖLDO Pickup height screw for Humbucker. 31mm length

0.55 *

In stock

Product no.: GP-08X20

Spring (conical type) for pickup mounting. 0.8x20mm

0.65 *

In stock

Product no.: SCW-0230

Humbucker height adjustment screw, nickel

0.89 *

In stock

Product no.: SCW-0231

Humbucker height adjustment screw, black

0.95 *

In stock

Product no.: SCW-0232

Nickel-plated screw for single coil pickups.

0.79 *

In stock

Product no.: SCW-0239

String holder block for IBANEZ bridge (2ED2C3) 

4.95 *

In stock

Product no.: GP-2TRX5BA016

IBANEZ String Stopper Bolt (2TRX5BA016)

2.50 *

In stock

Product no.: SCW-0235

Saddle mounting screw for IBANEZ bridge (2GBX5BA008)

1.50 *

In stock

Product no.: SCW-0236

IBANEZ String holder block lock screw (2ED2C4)

1.50 *

In stock

Product no.: SCW-0237

IBANEZ (2LN3YBA002) Locking nut mounting screw 

1.50 *

In stock

Product no.: SCW-0238

Saddle mounting screw for IBANEZ bridge (2TRX5BA001)

1.50 *

In stock

Product no.: NUT-0206

3/8"-32 thread replacement hex nut for american 1/4" jacks. Keystone, Made in USA.

0.43 *
Product data sheet

In stock

Product no.: NUT-0212

Switchcraft 3/8" pitch hex nut. Ideal for replacing nuts on 1/4" open and closed female jacks. Switchcraft, Made in USA.

0.33 *

In stock

Product no.: SCW-0233

GÖLDO Pickup height screw for Humbucker, gold

1.50 *

In stock

Product no.: GP-05X13

Spring (conical type) for pickup mounting (singlecoil). 0.5x13mm

0.23 *

In stock

Product no.: GP-07X22

Spring (conical type) for pickup mounting. 0.7x22mm

0.22 / cm *

In stock

Product no.: SCW-0098

Genuine Fender® 3 bolt neck micro tilt adjust mounting bolt. This bolt goes in the lower location in the Fender 3-bolt neck plate. This bolt is secures your neck angle adjustment once you have made your neck tilt angle change with the set screw. Size: 1/4-28 x 1-9/16"

5.95 *

In stock

Product no.: SCW-0013

IBANEZ Pressure Pad Lock Bolt for Barless Type (2LN3YBA001). Valid for use with GP-2LN3YBA013

1.95 *

In stock

Product no.: SCW-0099

Single IBANEZ Saddle Holding Bolt for Edge III

3.50 *

In stock

Product no.: SCW-SR06C

Raised countersunk head screw, Phillips PH1 slot. 4.2mm head diameter, Ø2mm thread diameter and 16mm length (including head), nickel-plated finish. Ideal for fixing pickup frames to the body of the guitar, it is not valid for all frames or for all models. Be sure of the measurements.

before 0.99 €
0.59 *
You save 0.40 €

Currently unavailable

Product no.: SCW-0107

Pickguard screws (24 units) Fender® size phillips head, 4x1/2"

7.99 / pack(s) *
1 piece(s) = 0.33 €

Currently unavailable

Product no.: NUT-0211

Replacement hex nut for Gibson Sg and Les Paul pickup switch, 15/32 ". SWITCHCRAFT, Made in USA.

0.49 *
Product data sheet

In stock

Product no.: NUT-0196

CTS mounting hex nut for 3/8 "-32 threaded potentiometers. Also fits american Switchcraft® 1/4" input jacks.

0.35 *

In stock

Product no.: SCW-0054

Pickguard screw Gibson® size phillips head, #3x3/8".  Phillips pan head self-tapping screw. Primarily used as a pickguard screw on Gibson® guitars and basses

 

0.50 *

In stock

Product no.: NUT-0197

Switchcraft ​15/32-32 Knurled nut with nickel plated finish. Made in USA.

0.99 *
Product data sheet

In stock

Product no.: SCW-0018

Oval countersunk screw 6-32x1/4" for Fender CRL switch. Stainless steel material.

1.35 / unit(s) *

In stock

Product no.: SCW-0019

Cylindric head, HEX 2.5mm  Allen head screw, M3x10mm size, black steel.

0.25 / unit(s) *

In stock

Product no.: SCW-0020

Ø3x12mm. PH1 Phillips countersunk head golden self-tapping screw. Mainly used as replacement for asian made pickguard screws.

 

0.28 *

In stock

Product no.: SCW-0037

PH1 Phillips hemispherical head screw for height adjustment of double pickups (Humbucker) with 1" (25.4mm) long American thread and 3-48 pitch, commonly used on Gibson, Golden Age, DiMarzio, Seymour Duncan, EMG and other pickups.

0.95 / unit(s) *

In stock

Product no.: SCW-0042

Gold Floyd Rose Tuning Screw.

2.50 / unit(s) *

In stock

Product no.: SCW-0058

Pan head screw 6-32x1/4" for  Fender CRL switch. Stainless steel material.

1.35 / unit(s) *

In stock

Product no.: SCW-0071

Black Floyd Rose Tuning Screw.

2.50 / unit(s) *

In stock

Product no.: SCW-0078

M3x12mm. PH1 Phillips countersunk head chrome plated self-tapping screw. Mainly used as replacement for asian made pickguard screws.

 

0.23 *

In stock

Product no.: SCW-0082

Ø3x12mm. PH1 Phillips countersunk head chrome plated self-tapping screw. Mainly used as replacement for asian made pickguard screws.

 

 

0.23 *

In stock

*
Prices incl. VAT, plus delivery