Product no.: POT-PC100RHUM-0472
HUM BALANCE 100 Ohm CTS pot for classic FENDER. (028421) |
8.25 €
*
In stock |
|
Product no.: POT-EP4585000-0458
CTS stacked concentric audio pots, intended for pickguard mounting. Pot is 1 and 15/16 inches total height. Made in USA |
17.95 €
*
In stock |
|
Product no.: POT-00043-A189
MARSHALL potentiometer, PCB vertical mounting, B10K |
7.95 €
*
In stock |
|
Product no.: POT-00020-A188
MARSHALL 16mm potentiometer, PCB vertical mounting, A10K |
7.50 €
*
In stock |
|
Product no.: POT-C24K19SP1A250K-0469
CTS A250K DPDT Push-Pull Potentiometer. Custom taper for a smoother volume or tone control ¡The best push-pull potentiometer on the market! |
12.98 €
*
In stock |
|
Product no.: POT-C24F17S
CTS Potentiometer, Ø6.3mm, full shaft, solder lugs. |
from
5.95 €
*
|
|
Product no.: POTC24BIASB10K-0471
CTS 10k Linear BIAS Set-Pot for classic Fender Amps |
6.50 €
*
In stock |
|
Product no.: POT-ABIASB10K-0438
ALPHA 24mm 10k Linear BIAS Set-Pot for classic Fender® Amps |
before 4.95 €
3.50 €
*
You save 1.45 €
In stock |
|
Product no.: POT-A11D209
Alps 11mm body carbon potentiometer, 4 pins 90º angled, Ø6x20mm insulated D shaft type. Used in many devices as mixers, effects pedals, amplifiers, controllers, etc. |
from
5.95 €
*
|
|
Product no.: POT-C24K28SP1C500K-0467
24mm body long bushing (28.5mm) potentiometer, made by CTS USA. It has a DPDT switch in push-pull configuration for pickup split, series-parallel, phase inverting and more configurations. Ideal for thick body Les Paul guitars. Only availabrle in log 500K resistance value (A500K) |
before 14.95 €
13.95 €
/ unit(s)
*
You save 1.00 €
Currently unavailable |
|
Product no.: POT-F16D20PB
®Fender 16mm PCB mount potentiometer, Ø6mm D shaft. |
before 12.95 €
9.90 €
*
You save 3.05 €
In stock |
|
Product no.: POT-R16K18SCD
Carbon 16mm wafer Guitar/Bass Potentiometer with central detention, Ø6 diameter knurled shaft, M8 bushing, 18mm lenght. Made in Korea. |
2.95 €
/ unit(s)
*
In stock |
|
Product no.: POT-EP4586000LIN
CTS 500K/500K concentric pot. USA |
19.50 €
*
Currently unavailable |
|
Product no.: POT-P16K18SP1M8
Partpartsland Korea 16mm push pull potentiometer (6pin DPDT switch), T18 Knurled shaft Ø6x18mm (closed) and solder lugs terminals. M8 thread |
from
6.50 €
*
In stock |
|
Product no.: POT-EP4385000
Log A250K audio CTS Dimple Vintage Potentiometer, Ø6x17mm split knurled shaft, 3/8" american thread, solder lugs. Made in USA by CTS corp. |
6.95 €
*
Currently unavailable |
|
Product no.: POT-C24K19SDIA300K-0433
Log A300K audio CTS Dimple Vintage Potentiometer, Ø6x19mm split knurled shaft, 3/8" american thread, solder lugs. Made in USA by CTS corp. |
7.25 €
*
In stock |
|
Product no.: POT-C24K19SDIA250K-0434
NO LOAD Dimple Vintage CTS TONE potentiometer for ®Fender strat guitars, A250K log, Ø6x19mm split knurled shaft, 3/8" american thread, solder lugs. Made in USA by CTS corp. |
7.90 €
*
Currently unavailable |
|
Product no.: POT-C24K16SDIA500K-0489
Log A500K audio CTS Dimple Vintage Potentiometer, Ø6x17mm split knurled shaft, 3/8" american thread, solder lugs. Made in USA by CTS corp. |
6.95 €
*
Currently unavailable |
|
Product no.: POT-C24K15SSA250K-0435
Log A250K CTS SHORT SPLINE Potentiometer, Ø6x15mm split knurled shaft, 3/8" american thread, solder lugs. Made in USA by CTS corp. |
before 8.98 €
7.55 €
*
You save 1.43 €
In stock |
|
Product no.: POT-EP5486000
CTS 500K mini split audio pot ALLPARTS |
4.95 €
*
Currently unavailable |
|
Product no.: POT-B12D159 |
before 7.50 €
5.95 €
*
You save 1.55 €
|
|
Product no.: POT-R16K20SST
16mm Dual gang potentiometer. Knurled split shaft, solder lug terminal pins. MN250K |
2.99 €
*
|
|
Product no.: POT-00076-A185
Marshall® Dual-Pot, 2x A200K, PC Mount, D-Shaft Marshall® Poti A200K log, stereo, PC-mount, 14mm, used in the Marshall DSL401 as a Mastervolume RohS Compliant |
6.95 €
*
Currently unavailable |
|
Product no.: POT-R16F159ST
Dual gang (stereo) 16mm potentiometer right angle PCB pins, Ø6.35x15mm full shaft. |
before 2.95 €
from
0.99 €
*
You save 1.96 €
|
|
Product no.: POT-C24K19SP1C500K-0468
CTS A500K DPDT Push-Pull Potentiometer. (450S3963). Custom taper for a smoother volume or tone control ¡The best push-pull potentiometer on the market! |
12.98 €
*
Currently unavailable |
|
Product no.: POT-C24K17SDIA250K-0430
Dimple Vintage CTS Potentiometer, Ø6x17mm split knurled shaft, solder lugs, A250K |
In stock |
|
Product no.: POT-ZPSB10K-0478
Peavey Pot, B10K, PC mount with bracket. Shaft diameter 4,4mm. |
9.90 €
/ unit(s)
*
In stock |
|
Product no.: POT-00068-A186
Marshall® Dual-Pot, PC Mount, D-Shaft. Marshall® Poti A1M log, 7 pin stereo config plus 2 mounting bracket, used mainly as the master volume knob in the Marshall Vintage Modern amp. RohS Compliant |
7.50 €
*
In stock |
|
Product no.: POT-P16K15S
Partsland 16mm guitar potentiometer, split 18T Ø6mm knurled shaft. Pre-tinned case for easy soldering, solder lug terminals. M8x7 size bushing lenght and 8mm shaft. Made in Korea. |
2.55 €
*
|
|
Product no.: POT-S16K15P
16mm carbon potentiometer, knurled shaft PC pins terminal for PCB mount, Ø6x15mm |
before 1.00 €
from
0.55 €
*
You save 0.45 €
In stock |
|
Product no.: POT-00129-A187
Alpha 11mm dual (stereo pot) for Marshall® AFD (VR7-Power) 2xB100K, PC Mount, Ø6mm D-Shaft, long threaded bushing, vertical mount.
|
8.50 €
*
In stock |
|
Product no.: POT-VMV2W-50K
Vishay multiturn 2W 50K potentiometer 10 turns |
15.92 €
*
Currently unavailable |
|
Product no.: POT-R16F15LSTMIXC100K-0497
16mm stereo pot MIX 90º PCB pins & solder lugs, Ø6.35x15mm full shaft C100K |
1.50 €
*
In stock |
|
Product no.: POT-CL24FS23SL-750K
Clarostat 24mm potentiometer, full shaft Ø6.35x22mm, solder lugs, B750K |
before 19.90 €
16.95 €
*
You save 2.95 €
Discontinued product |
|
Product no.: POT-OM20F50P-0476
Omeg 24mm linear potentiometer, full shaft Ø6x50mm, pcb B47K, 0.4W |
before 3.50 €
2.79 €
*
You save 0.71 €
In stock |
|
Product no.: POT-R16K20PHK
Hughes & Kettner ampliffier pots, knurled shaft 6mm diameter, 18T. Mainly used in H&K Attax, Tubeman and other models amplifiers. |
before 7.95 €
6.50 €
*
You save 1.45 €
In stock |
|
Product no.: POT-C24F17SDIA250K-0431
Dimple Vintage CTS Potentiometer, Ø6.3x17mm, full shaft, solder lugs, A250K |
In stock |
|
Product no.: POT-P16K18S
Partsland 16mm guitar potentiometer, split 18T knurled shaft. Pre-tinned case for easy soldering, solder lug terminals. 10mm bushing lenght and 8 mm shaft. Made in Korea. |
2.95 €
*
|
|
Product no.: POT-SW1M-0466
A1M log Pot with turn-on-switch SPST TAD 32 mm, full shaft, 15mm. Used at Fender Tweed Champ Amp. |
7.95 €
*
In stock |
|
Product no.: POT-SW1M
A1M log Pot with turn-on-switch SPST 32 mm, full shaft, 15mm. Used at Fender Tweed Champ Amp. |
In stock |
|
Product no.: POT-C24K16SA1M-0437
CTS 24mm A1M Push Pull potentiometer, knurled shaft. 16mm length including bushing. TAD ordering code Z-PPC1MA. Made in USA. |
9.95 €
/ unit(s)
*
In stock |
|
Product no.: POT-C24K16SA10K-0436
CTS 24mm A10K Push Pull potentiometer, knurled shaft. 16mm length including bushing. TAD ordering code Z-PPC10KA. Made in USA. |
9.50 €
/ unit(s)
*
In stock |
|
51 - 92 of 92 results |
|